Model 6K00
Relief Vent With Flame Arrestor
SKU#:
Model 6K00
Description
The Model 6K00 Pressure / Vacuum Vent with Flame Arrestor is designed for use on atmospheric and low-pressure storage tanks where pressure and vacuum relief is required. The design include a deflagration flame arrestor consisting of a crimped SST metal element which allows the flow of gases or vapor of flammable liquids but prevent the flame-transmission from the outside. It provides an extinguishing barrier to the ignited vapor mixture by absorbing heat from the flame. The model 6K00 is used as an independent safety system to ensure explosion protection.
Line Sizes
- 2" (DN50)
- 3" (DN80)
- 4" (DN100)
- 6" (DN150)
- 8" (DN200)
- 10" (DN250)
- 12" (DN300)
Body Materials
- Carbon Steel
- Stainless Steel
Features
- Maintains Accurate Settings: Standard settings for pressure are +5 mbar to +50 mbar and for vacuum -2,5 to -50 mbar. Other settings are available upon request.
- All vents are tested to Cashco high standards for both leakage and set point prior to shipment. A certified test certificate is included with each vent verifying the accuracy of both the pressure and vacuum setting and leakage. Seat leakage meets or exceeds international standards (ISO 28300, API 2000).
- Condensate Drainage: Self-draining body and specially designed seat ring keeps condensate away from seating surfaces, preventing freezing, binding, and clogging.
- Air-Cushioned Seating: Air-cushion seating provides tight sealing to reduce evaporation losses and the release of toxic vapors. The pallets have center guiding stem to provide self alignment and tight seating.
- Sizes: Available in sizes DN50 (2”), DN80 (3”), DN100 (4”), DN150 (6”), DN200 (8”), DN250 (10”) and DN300 (12”). All vents have a raised face connection flange. Standard flanged bolt patterns are available to mate with DIN PN10 or ASME Class 150 flanged connections.
| Category Label | Relief Vent With Flame Arrestor |
|---|---|
| Line Size | 2" (DN50), 3" (DN80), 4" (DN100), 6" (DN150), 8" (DN200), 10" (DN250), 12" (DN300) |
| End Connections | DIN (PN10), ASME (150#RF) |
| Body Material | Carbon Steel, Stainless Steel |
| Mounting Type | End-Of-Line |
