Model CA-2
Back Pressure Regulator
SKU#:
Model CA-2
Description
The Model CA-2 is a compact bronze or stainless steel back pressure regulator used to control inlet pressure level between atmospheric and 610 psig (42.0 Barg) by relieving excess pressure.
Inlet Design Pressure
- Up to 600 psig (41.4 Barg)
Outlet Pressure
- 2 psig (0.14 Barg) to 400 psig (27.6)
Line Sizes
- 3/8" (DN10)
- 1/2" (DN15)
See the Model CA-1 for smaller sizes.
End Connections
- NPT Female
Material Combinations: Body / Spring Chamber
- Brass
Features
- Self-Aligning Plug/Seat: Seat ring floats within mechanically contained zone.
- Tight Shutoff: Lapped seat surfaces allow for leakage rates to approach levels of composition seats.
| Category Label | Back Pressure Regulator | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Service | Gases, Liquids | |||||||||||||||||||||||||||
| Line Size | 3/8" (DN10), 1/2" (DN15) | |||||||||||||||||||||||||||
| End Connections | FNPT | |||||||||||||||||||||||||||
| Process Applications | Pump By-Pass, Economizer | |||||||||||||||||||||||||||
| Body Material | Brass | |||||||||||||||||||||||||||
| CV Tables |
|
