Model SCV-30
Control Valve
SKU#:
Model SCV-30
Description
The Model SCV-30 * is a revolutionary, throttling, pneumatically actuated control valve. This unique design provides a geometrically characterized plug for superior throttling dynamics, plus the unit’s ease of cleanability and maintenance meet the requirements of sanitary control valves.
The design incorporates a formed internal diaphragm that is bonded to a characterized metal plug. The diaphragm/body provides the smooth internal passages necessary for ease in cleaning and sanitizing. The plug head provides rigidity to the otherwise flexible diaphragm in the throttling zone where characterized control is desired.
Design Pressure
Maximum Allowable Working Pressure: Up To 60 psig (4.1 Barg)
Line Sizes
- 3/4" (DN20)
- 1" (DN25)
- 1-1/2" (DN40)
End Connections
- Standard: Sanitary “Tri-Clamp®”. De- signed to seal against weld type clamp liners per ISO 2852.
- Optional: Butt weld (Opt-24).
Body Materials
- Forged 316L SST
- Bar Stock 316L SST
Features
- Design Concept: A control valve for throttling applications.
- Two Body Configurations: Traditional straight-through globe pattern, or angle body pattern, both self-draining. Forged 316L SST or Bar Stock 316L SST body material.
- Multiple Ports: Both full and reduced port designs to optimize dynamic response.
- Characteristic: Linear.
- Multiple Diaphragms: Three to select from — EPDM, Fluorocarbon Elastomer, or Silicone.
- Polished Interior: Interior of wetted body mechanically polished and electro-polished to 10 micro- inch Ra finish.
- Exterior Finish: SST portions of body electro-polished. All other metallic exposed surfaces are of SST or painted with epoxy.
- Readily Accessible: Unit can be easily and quickly disassembled in-line for inspection or trim replacement. Quick disconnect stem.
- Cleaning Capability: Unit designed for clean-in-place (CIP) and steam-in-place (SIP) systems.
- 3A Construction: Selection of composition diaphragms bonded to metallic plug/stem meets 3A Sanitary Standards, Authorization No. 745
| Category Label | Control Valve |
|---|---|
| Line Size | 3/4" (DN20), 1" (DN25), 1.5" (DN40) |
| End Connections | Tri-Clamp, Butt Weld |
| Service | Gases, Liquids, Steam |
| Process Applications | Sanitary Service |
| Body Material | Stainless Steel |
